Troubleshooting

From Longview ISD Technology Wiki

(Difference between revisions)
Jump to: navigation, search
 
(5 intermediate revisions not shown)
Line 27: Line 27:
* Make sure the network cable is plugged into the correct hole under the monitor. See [[Samsung Thin Client Hookup]]
* Make sure the network cable is plugged into the correct hole under the monitor. See [[Samsung Thin Client Hookup]]
* Check to make sure the network cable is plugged in at the wall.  
* Check to make sure the network cable is plugged in at the wall.  
-
* Check the Configuration settings (see page 2)
+
* Check the Configuration settings. See [[Samsung Thin Client Network Configuration]]
-
 
+
* Gently wiggle the mouse and wait for the login window to appear.  
* Gently wiggle the mouse and wait for the login window to appear.  
* Repeat, if needed.
* Repeat, if needed.
 +
 +
==== Black Screen/White Arrow ====
 +
'''Student:'''
 +
* Wait 2-3 minutes.
 +
* After 2-3 min. call the Help Desk and give the student’s name and ID # .
 +
 +
'''Staff:'''
 +
* Wait 5-10 min. to allow updates to be installed.
 +
* After 5-10 min., if the computer still does not go to the desktop call the Help Desk  903-446-2400 and have the computer Reset.
 +
 +
==== Other Error Messages ====
 +
* “Display Protocol…”
 +
* “Agent Unreachable…” 
 +
* “Blocked by a Firewall…”
 +
* “Domain Contoller…”
 +
 +
Call the Help Desk. 903-446-2400
 +
 +
[[Virtual Computer/Thin Client FAQs]]

Current revision as of 19:02, 9 January 2013

Contents

Login Problems

  • Erase the previous username and start with a clean typing space.
  • Make sure you do not have a space in front of the 1st letter of your username.
  • Type the password slowly.
  • “Failed to authenticate” - Type the password again
  • “Bad username or password”
    • Check for typing errors.
    • Type the information again slowly

Power Issues

Is the blue light glowing just below the Samsung label and above the silver bar? If not,

  • Make sure the power cable is pushed in snugly under the monitor and on the wall.
  • Make sure the toggle switch is turned ON.

Power Plug

  • Push the ON/OFF button under the silver bar gently to see if the blue light comes on.

Samsung Silver Bar

Black Screen/Analog Message

If the screen has a black screen with signal/source lost or analog message going across the screen.

  • Locate the SOURCE button on the silver bar.
  • Gently push the button located under the word source.

View Connection Error

  • Make sure the network cable is plugged into the correct hole under the monitor. See Samsung Thin Client Hookup
  • Check to make sure the network cable is plugged in at the wall.
  • Check the Configuration settings. See Samsung Thin Client Network Configuration
  • Gently wiggle the mouse and wait for the login window to appear.
  • Repeat, if needed.

Black Screen/White Arrow

Student:

  • Wait 2-3 minutes.
  • After 2-3 min. call the Help Desk and give the student’s name and ID # .

Staff:

  • Wait 5-10 min. to allow updates to be installed.
  • After 5-10 min., if the computer still does not go to the desktop call the Help Desk 903-446-2400 and have the computer Reset.

Other Error Messages

  • “Display Protocol…”
  • “Agent Unreachable…”
  • “Blocked by a Firewall…”
  • “Domain Contoller…”

Call the Help Desk. 903-446-2400

Virtual Computer/Thin Client FAQs

Personal tools