Epson 410W Projector
From Longview ISD Technology Wiki
(Difference between revisions)
(→Cleaning Filter) |
(→Cleaning Filter) |
||
Line 9: | Line 9: | ||
[[File:EpsonFilter.jpg|255px|Epson Filter]] | [[File:EpsonFilter.jpg|255px|Epson Filter]] | ||
- | To clean the filter you can use: | + | '''To clean the filter you can use:''' |
* canned air (provide your own) | * canned air (provide your own) | ||
* blower (if available) | * blower (if available) | ||
* small hand vacuum cleaner (if available) | * small hand vacuum cleaner (if available) | ||
* mouth – blow VERY, VERY hard!! | * mouth – blow VERY, VERY hard!! | ||
- | * ''' | + | * '''DO NOT USE WATER to clean the filter!''' |
- | To clean the vent (only if you can see dust & lint inside the vent after you remove the filter) | + | '''To clean the vent''' ''(only if you can see dust & lint inside the vent after you remove the filter)'' |
Epson recommends using a small vacuum cleaner designed for computers and other office equipment. | Epson recommends using a small vacuum cleaner designed for computers and other office equipment. | ||
== TroubleShooting == | == TroubleShooting == |
Revision as of 15:52, 9 January 2013
Cleaning Filter
- Turn off the projector and allow it to cool down.
- The filter is located on the side of the projector that has the lamp.
- As you face the whiteboard it is on the right side of the projector.
- Slide the filter out, as shown. This allows both sides of the filter to be cleaned.
To clean the filter you can use:
- canned air (provide your own)
- blower (if available)
- small hand vacuum cleaner (if available)
- mouth – blow VERY, VERY hard!!
- DO NOT USE WATER to clean the filter!
To clean the vent (only if you can see dust & lint inside the vent after you remove the filter) Epson recommends using a small vacuum cleaner designed for computers and other office equipment.