Epson 410W Projector

From Longview ISD Technology Wiki

(Difference between revisions)
Jump to: navigation, search
(Cleaning Filter)
(Cleaning Filter)
Line 8: Line 8:
<br>
<br>
[[File:EpsonFilter.jpg|255px|Epson Filter]]
[[File:EpsonFilter.jpg|255px|Epson Filter]]
 +
# To clean the filter you can use:
 +
#* canned air (provide your own)
 +
#* blower (if available)
 +
#* small hand vacuum cleaner (if available)
 +
#* mouth – blow VERY, VERY hard!!
 +
(Do NOT USE WATER!!!!)
 +
# To clean the vent (only if you can see dust & lint inside the vent after you remove the filter)
 +
Epson recommends using a small vacuum cleaner designed for computers and other office equipment.
== TroubleShooting ==
== TroubleShooting ==

Revision as of 15:41, 9 January 2013


Cleaning Filter

  1. Turn off the projector and allow it to cool down.
  2. The filter is located on the side of the projector that has the lamp.
  3. As you face the whiteboard it is on the right side of the projector.
  4. Slide the filter out, as shown. This allows both sides of the filter to be cleaned.


Epson Filter

  1. To clean the filter you can use:
    • canned air (provide your own)
    • blower (if available)
    • small hand vacuum cleaner (if available)
    • mouth – blow VERY, VERY hard!!

(Do NOT USE WATER!!!!)

  1. To clean the vent (only if you can see dust & lint inside the vent after you remove the filter)

Epson recommends using a small vacuum cleaner designed for computers and other office equipment.

TroubleShooting

Personal tools