Learning.com

From Longview ISD Technology Wiki

(Difference between revisions)
Jump to: navigation, search
(→Enroll Students)
 
(5 intermediate revisions not shown)
Line 15: Line 15:
:7. Set the '''Passing Rate''', as desired. '''70% - 85%'''
:7. Set the '''Passing Rate''', as desired. '''70% - 85%'''
:8. Add more classes, as needed.
:8. Add more classes, as needed.
 +
Note: You will not need to create new classes each year. You can simply modify what you have already created by removing last year's students and adding or removing curriculum for each of your classes.
== Enroll Students ==
== Enroll Students ==
 +
Note: If you are using classes created previously you may need to remove students no longer in your class. See "Removing Enrolled Students".
:1. To add students to your class you must first select the class.  
:1. To add students to your class you must first select the class.  
:2. Then click the [[File:Learning.com_enroll1.png|100px|Enroll students]] button.
:2. Then click the [[File:Learning.com_enroll1.png|100px|Enroll students]] button.
:3. Choose the grade level.
:3. Choose the grade level.
-
:4. Click the check box next your students’ names and click the [[File:Learning.com_enroll2.png|100px|Enroll selected]]  button.  ''Recommended: Enroll students one page at a time. There are sometimes several pages of students per grade level.''
+
:4. Click the box in front of each of your students’ names and then click the [[File:Learning.com_enroll2.png|100px|Enroll selected]]  button.  ''Recommended: Enroll students one page at a time. There are sometimes several pages of students per grade level.''
-
:5. Repeat the process for each page of students and for each class that you have created.
+
 
 +
'''To enroll the same students in other classes you may have created:'''
 +
:1. Select the next class
 +
:2. Click the Enrolled Students button.
 +
:3. Click the square located to the left of '''Last Name''' to select all of the students in the list at one time.
 +
:4. Click '''Enroll Selected'''.
 +
:5. Repeat for each class that has the same students.
 +
 
 +
== Remove Students ==
 +
'''To remove last year's students:'''
 +
:1. Select the class for which you need to remove students.  Note: This method will remove the students from all of the classes for which you have enrolled them.
 +
:2. Click the [[File:Learning.com_Students.jpg|50px|Enroll students]] button.
 +
:3. Click the '''Enrolled Students''' button and place a checkmark in the square just above the list of last names. This will select all of the students.
 +
:::[[File:Learning_RemoveStudents.jpg|300px|window]]
 +
:4. Then click '''Drop From All Classes'''.
 +
 
 +
'''To remove only 1-2 students from a class:'''
 +
:1. Select the class for which you need to remove students.
 +
:2. On the left side of the window select the Student icon. This will show a list directly under of the students enrolled in the class.
 +
:::[[File:Learning.com_Students2.jpg|200px|window]]
 +
 
 +
:3. Click the '''Edit''' button. 
 +
:4. Click each X to delete the students one at a time.
 +
:::[[File:Learning.com_Students3.jpg|200px|window]]
 +
 
 +
:5. Click '''Done''' when deletion is complete.
 +
 
== Add New Students ==
== Add New Students ==
Line 62: Line 90:
:6. Printing login cards for grades PK – 3 is advised.
:6. Printing login cards for grades PK – 3 is advised.
:::Sample login card:
:::Sample login card:
-
:::[[File:Learning.com_logincard2.jpg|200px|sample]]
+
:::[[File:Learning.com_logincard2.png|200px|sample]]
-
:::[[File:Learning.com_logincard2.jpg|100px|sample]]
+

Current revision as of 20:00, 22 January 2013

Contents

Teacher Login

1. Go to Learning.com
2. Enter your network username
3. Enter the password assigned for Learning.com (Ask your ITS or call the Help Desk)
4. Type Longview ISD for the school district.

Class Setup

1. To set up your classes click on the Classes button.Add classes
window
2. Name your class and click Add.
3. Select the Grade Level
4. Leave Lesson Certificate as none.
5. Leave Student Tracking as Yes.
6. Set Lesson Sequence as Forced. Forced causes the students to do the lessons in the order you assigned them.
7. Set the Passing Rate, as desired. 70% - 85%
8. Add more classes, as needed.

Note: You will not need to create new classes each year. You can simply modify what you have already created by removing last year's students and adding or removing curriculum for each of your classes.

Enroll Students

Note: If you are using classes created previously you may need to remove students no longer in your class. See "Removing Enrolled Students".

1. To add students to your class you must first select the class.
2. Then click the Enroll students button.
3. Choose the grade level.
4. Click the box in front of each of your students’ names and then click the Enroll selected button. Recommended: Enroll students one page at a time. There are sometimes several pages of students per grade level.

To enroll the same students in other classes you may have created:

1. Select the next class
2. Click the Enrolled Students button.
3. Click the square located to the left of Last Name to select all of the students in the list at one time.
4. Click Enroll Selected.
5. Repeat for each class that has the same students.

Remove Students

To remove last year's students:

1. Select the class for which you need to remove students. Note: This method will remove the students from all of the classes for which you have enrolled them.
2. Click the Enroll students button.
3. Click the Enrolled Students button and place a checkmark in the square just above the list of last names. This will select all of the students.
window
4. Then click Drop From All Classes.

To remove only 1-2 students from a class:

1. Select the class for which you need to remove students.
2. On the left side of the window select the Student icon. This will show a list directly under of the students enrolled in the class.
window
3. Click the Edit button.
4. Click each X to delete the students one at a time.
window
5. Click Done when deletion is complete.


Add New Students

In the event a student is not already listed you can add a new student.

1. Click the new student button.
2. Fill in the form.
window
3. Click either Save and Add Another or Save.
4. If a red message comes up that indicates there is another user in this district with this Student ID contact your ITS.
5. Your ITS will need to know the student’s:
  • First & last name
  • ID#
  • Grade level

Add Curriculum to Classes

1. Click thenew student button.
2. Click on the desired curriculum icon.
window
3. Select the search parameters.
window
4 Click the View button to see a list of lessons.
5. Lessons are listed with the following codes. Note: You can view a lesson before assigning it by clicking the View button.
window
6. Click the Assign button to add the lesson to your curriculum.

Student Login

1. Go to Learning.com
2. Students will type in the following to login:
  • Username = student ID#
  • Password = student ID#
  • Type Longview ISD for the school district.

Student Login Cards

1. Log into Learning.com
2. Click on a class name.
3. Verify that all of the students have been added to that class.
4. Locate the button named Print Log in Cards.
Note: The new student button will not be visible until you have added curriculum to the class.
5. A file containing a login card for each student will be generated with 8 cards per page.
6. Printing login cards for grades PK – 3 is advised.
Sample login card:
sample
Retrieved from "http://help.lisd.org/index.php/Learning.com"
Personal tools