Learning.com
From Longview ISD Technology Wiki
(Difference between revisions)
(→Enroll Students) |
|||
(26 intermediate revisions not shown) | |||
Line 1: | Line 1: | ||
== Teacher Login == | == Teacher Login == | ||
- | : | + | :1. Go to Learning.com |
- | : | + | :2. Enter your network username |
- | : | + | :3. Enter the password assigned for Learning.com (Ask your ITS or call the Help Desk) |
- | : | + | :4. Type Longview ISD for the school district. |
== Class Setup == | == Class Setup == | ||
- | + | :1. To set up your classes click on the '''Classes''' button.[[File:Learning.com_addbutton.jpg|50px|Add classes]] | |
- | + | :::[[File:Learning.com_addwindow.jpg|200px|window]] | |
- | + | :2. '''Name your class''' and click '''Add'''. | |
- | + | :3. Select the '''Grade Level''' | |
- | + | :4. Leave '''Lesson Certificate''' as '''none'''. | |
- | + | :5. Leave '''Student Tracking''' as '''Yes'''. | |
- | + | :6. Set '''Lesson Sequence''' as '''Forced'''. Forced causes the students to do the lessons in the order you assigned them. | |
- | + | :7. Set the '''Passing Rate''', as desired. '''70% - 85%''' | |
- | + | :8. Add more classes, as needed. | |
+ | Note: You will not need to create new classes each year. You can simply modify what you have already created by removing last year's students and adding or removing curriculum for each of your classes. | ||
== Enroll Students == | == Enroll Students == | ||
- | : | + | Note: If you are using classes created previously you may need to remove students no longer in your class. See "Removing Enrolled Students". |
- | : | + | :1. To add students to your class you must first select the class. |
- | : | + | :2. Then click the [[File:Learning.com_enroll1.png|100px|Enroll students]] button. |
- | : | + | :3. Choose the grade level. |
- | : | + | :4. Click the box in front of each of your students’ names and then click the [[File:Learning.com_enroll2.png|100px|Enroll selected]] button. ''Recommended: Enroll students one page at a time. There are sometimes several pages of students per grade level.'' |
+ | |||
+ | '''To enroll the same students in other classes you may have created:''' | ||
+ | :1. Select the next class | ||
+ | :2. Click the Enrolled Students button. | ||
+ | :3. Click the square located to the left of '''Last Name''' to select all of the students in the list at one time. | ||
+ | :4. Click '''Enroll Selected'''. | ||
+ | :5. Repeat for each class that has the same students. | ||
+ | |||
+ | == Remove Students == | ||
+ | '''To remove last year's students:''' | ||
+ | :1. Select the class for which you need to remove students. Note: This method will remove the students from all of the classes for which you have enrolled them. | ||
+ | :2. Click the [[File:Learning.com_Students.jpg|50px|Enroll students]] button. | ||
+ | :3. Click the '''Enrolled Students''' button and place a checkmark in the square just above the list of last names. This will select all of the students. | ||
+ | :::[[File:Learning_RemoveStudents.jpg|300px|window]] | ||
+ | :4. Then click '''Drop From All Classes'''. | ||
+ | |||
+ | '''To remove only 1-2 students from a class:''' | ||
+ | :1. Select the class for which you need to remove students. | ||
+ | :2. On the left side of the window select the Student icon. This will show a list directly under of the students enrolled in the class. | ||
+ | :::[[File:Learning.com_Students2.jpg|200px|window]] | ||
+ | |||
+ | :3. Click the '''Edit''' button. | ||
+ | :4. Click each X to delete the students one at a time. | ||
+ | :::[[File:Learning.com_Students3.jpg|200px|window]] | ||
+ | |||
+ | :5. Click '''Done''' when deletion is complete. | ||
+ | |||
== Add New Students == | == Add New Students == | ||
In the event a student is not already listed you can add a new student. | In the event a student is not already listed you can add a new student. | ||
- | : | + | :1. Click the [[File:Learning.com_newstudent.jpg|125px|new student]] button. |
- | : | + | :2. Fill in the form. |
- | ::: | + | ::::[[File:Learning.com_newstudent3b.jpg|300px|window]] |
- | :::* | + | :3. Click either '''Save and Add Another''' or '''Save'''. |
- | + | :4. If a red message comes up that indicates there is another user in this district with this Student ID contact your ITS. | |
- | + | :5. Your ITS will need to know the student’s: | |
- | :::* Username | + | ::* First & last name |
- | + | ::* ID# | |
+ | ::* Grade level | ||
+ | |||
+ | == Add Curriculum to Classes == | ||
+ | :1. Click the[[File:Learning.com_assign.jpg|125px|new student]] button. | ||
+ | :2. Click on the desired curriculum icon. | ||
+ | ::::[[File:Learning.com_curriculum.jpg|400px|window]] | ||
+ | :3. Select the search parameters. | ||
+ | ::::[[File:Learning.com_curriculum2.jpg|400px|window]] | ||
+ | :4 Click the '''View''' button to see a list of lessons. | ||
+ | :5. Lessons are listed with the following codes. ''Note: You can view a lesson before assigning it by clicking the View button.'' | ||
+ | ::::[[File:Learning.com_curriculumtypes.jpg|500px|window]] | ||
+ | :6. Click the '''Assign''' button to add the lesson to your curriculum. | ||
+ | |||
+ | == Student Login == | ||
+ | :1. Go to Learning.com | ||
+ | :2. Students will type in the following to login: | ||
+ | ::* Username = student ID# | ||
+ | ::* Password = student ID# | ||
+ | ::* Type Longview ISD for the school district. | ||
+ | |||
+ | == Student Login Cards == | ||
+ | :1. Log into Learning.com | ||
+ | :2. Click on a class name. | ||
+ | :3. Verify that all of the students have been added to that class. | ||
+ | :4. Locate the button named '''Print Log in Cards'''. | ||
+ | ::: '''Note:''' The [[File:Learning.com_logincard.jpg|100px|new student]] button will not be visible until you have added curriculum to the class. | ||
+ | :5. A file containing a login card for each student will be generated with 8 cards per page. | ||
+ | :6. Printing login cards for grades PK – 3 is advised. | ||
+ | :::Sample login card: | ||
+ | :::[[File:Learning.com_logincard2.png|200px|sample]] |
Current revision as of 20:00, 22 January 2013
Contents |
Teacher Login
- 1. Go to Learning.com
- 2. Enter your network username
- 3. Enter the password assigned for Learning.com (Ask your ITS or call the Help Desk)
- 4. Type Longview ISD for the school district.
Class Setup
- 1. To set up your classes click on the Classes button.
- 2. Name your class and click Add.
- 3. Select the Grade Level
- 4. Leave Lesson Certificate as none.
- 5. Leave Student Tracking as Yes.
- 6. Set Lesson Sequence as Forced. Forced causes the students to do the lessons in the order you assigned them.
- 7. Set the Passing Rate, as desired. 70% - 85%
- 8. Add more classes, as needed.
Note: You will not need to create new classes each year. You can simply modify what you have already created by removing last year's students and adding or removing curriculum for each of your classes.
Enroll Students
Note: If you are using classes created previously you may need to remove students no longer in your class. See "Removing Enrolled Students".
- 1. To add students to your class you must first select the class.
- 2. Then click the button.
- 3. Choose the grade level.
- 4. Click the box in front of each of your students’ names and then click the button. Recommended: Enroll students one page at a time. There are sometimes several pages of students per grade level.
To enroll the same students in other classes you may have created:
- 1. Select the next class
- 2. Click the Enrolled Students button.
- 3. Click the square located to the left of Last Name to select all of the students in the list at one time.
- 4. Click Enroll Selected.
- 5. Repeat for each class that has the same students.
Remove Students
To remove last year's students:
- 1. Select the class for which you need to remove students. Note: This method will remove the students from all of the classes for which you have enrolled them.
- 2. Click the button.
- 3. Click the Enrolled Students button and place a checkmark in the square just above the list of last names. This will select all of the students.
- 4. Then click Drop From All Classes.
To remove only 1-2 students from a class:
- 1. Select the class for which you need to remove students.
- 2. On the left side of the window select the Student icon. This will show a list directly under of the students enrolled in the class.
- 5. Click Done when deletion is complete.
Add New Students
In the event a student is not already listed you can add a new student.
- 1. Click the button.
- 2. Fill in the form.
- 3. Click either Save and Add Another or Save.
- 4. If a red message comes up that indicates there is another user in this district with this Student ID contact your ITS.
- 5. Your ITS will need to know the student’s:
-
- First & last name
- ID#
- Grade level
-
Add Curriculum to Classes
- 1. Click the button.
- 2. Click on the desired curriculum icon.
- 3. Select the search parameters.
- 4 Click the View button to see a list of lessons.
- 5. Lessons are listed with the following codes. Note: You can view a lesson before assigning it by clicking the View button.
- 6. Click the Assign button to add the lesson to your curriculum.
Student Login
- 1. Go to Learning.com
- 2. Students will type in the following to login:
-
- Username = student ID#
- Password = student ID#
- Type Longview ISD for the school district.
-
Student Login Cards
- 1. Log into Learning.com
- 2. Click on a class name.
- 3. Verify that all of the students have been added to that class.
- 4. Locate the button named Print Log in Cards.
- 5. A file containing a login card for each student will be generated with 8 cards per page.
- 6. Printing login cards for grades PK – 3 is advised.