Samsung Thin Client Network Configuration
From Longview ISD Technology Wiki
(Difference between revisions)
(3 intermediate revisions not shown) | |||
Line 31: | Line 31: | ||
* SSL: no check | * SSL: no check | ||
* Auto connect: check | * Auto connect: check | ||
- | |||
==== Settings for Discovery Tab ==== | ==== Settings for Discovery Tab ==== | ||
[[File:ThinClientDiscoveryTab.jpg|200px|Thin Client Discovery Tab]] | [[File:ThinClientDiscoveryTab.jpg|200px|Thin Client Discovery Tab]] | ||
- | + | *Enable Discovery: check | |
- | * Enable | + | *Enable Host discovery: check |
- | * | + | |
- | + | [[Virtual Computer/Thin Client FAQs]] | |
- | + | ||
- | + | ||
- | + |
Current revision as of 19:51, 18 January 2013
Click the word OPTIONS in the upper left corner of the screen.
Choose CONFIGURATION. Under Configuration a window will come up which will have several tabs across the top.
Main tabs to check for configuration: Network Tab, VMWare View Tab, Discovery Tab
Important: if you need to make any changes in the configuration you will need to Reset or Restart the computer. Do whatever it says to do.
Setting for Network Tab
- Enable DHCP: Check.
- IP Address: Will vary. Example: 10.8.4.245
- Subnet Mask: 255.255.0.0
- Gateway: Will vary. Example: 10.8.0.1
- Primary DNS Server: 10.40.7.2
- Secondary DNS Server: 10.40.7.6
- Domain Name: lisd.org
- FQDN: blank
- Ethernet Mode: Auto
Settings for VMWare Tab
- Enable VMware View:
- Identity connection Server by: FQDN
- Connection Server FQDN: nemesis.lisd.org
- Port: leave blank
- SSL: no check
- Auto connect: check
Settings for Discovery Tab
- Enable Discovery: check
- Enable Host discovery: check